Inspection (Instalation, Preparation, Mounting Unit)

INSTALATION 

Unpacking and Inspection
Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. You should have received the following items inside of package:
The unit x 1
User manual x 1
Communication cable x 1
Software CD x 1 

Preparation
Before connecting all wirings, please take off bottom cover by removing two screws as shown below. 

Mounting the Unit
Consider the following points before selecting where to install:

1. Do not mount the inverter on flammable construction materials. 
2. Mount on a solid surface .
3. Install this inverter at eye level in order to allow the LCD display to be read at all times. 
4. For proper air circulation to dissipate heat, allow a clearance of approx. 20 cm to the side and approx. 50 cm above and below the unit.
5. The ambient temperature should be between 0°C and 55°C to ensure optimal operation. 
6. The recommended installation position is to be adhered to the wall vertically.
7. Be sure to keep other objects and surfaces as shown in the diagram to guarantee sufficient heat dissipation and to have enough space for removing wires.

SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE ONLY. Install the unit by screwing three screws. It’s recommended to use M4 or M5 screws.